Color Prime consumablesCustomer login

How to Adjust Chroma Settings to Make the Prints More Vibrant

Every step links to its own moment in the video, so you never hunt for the right part again.

  • 4 steps
  • 9 instructions
  • 1 video
  • Updated 2026-04-20

How to Adjust Chroma in DigiRIP

Written steps 4

Overview

Watch this part0:00
  1. This guide explains how to adjust **Chroma** in DigiRIP to enhance color vibrancy.

Adjusting Chroma

  1. Click **Q Properties**.
  2. Select **Color Adjust**.
  3. Go to the **Graphics** section.
  4. Set **Chroma** to **10** as a starting point.
  5. Run a test print to evaluate the result.

Fine-Tuning Chroma

  1. If additional color saturation is needed: Gradually increase the Chroma value.
  2. Do not exceed a value of **15**.
  3. Test prints after each adjustment to avoid oversaturation.

End of Guide

This completes the process for adjusting chroma in DigiRIP.

Stuck on a step?

Your authorized dealer installs, trains and services your machine, and our factory support team is behind them. Reach either from the support page.

Get support