How to Adjust White Ink Amount and White Choke Settings in Neostampa

This guide explains how to adjust white ink intensity and choke settings in NeoStampa to correct prints with too much or too little white ink. Method 1: Adjusting White Ink per Image

1. Click the image you want to adjust.

1. On the right-hand side, click **White Effect Layer**.
2. Under **Method**, select **Flat**.

1. Locate the **Intensity (%)** setting.
2. If there is too much white ink: Reduce the value (example: **70%**).
3. Click **Save**.
4. This also updates the **default setting** for that image. Method 2: Adjusting White Ink Globally (Profile Level)

1. Click the **three-dot** menu in the upper-right corner.
2. Select the **correct profile**.

1. Next to the **5-color** option, click the **White Ink** icon.
2. Select **White**.

1. Adjust the **Intensity (%)**: Increase if there is too little white ink.
2. Click **OK**. Adjusting Choke Settings

• Decrease if there is too much.

1. Locate the **Choke** setting.
2. If white ink is picking up on edges, increase choke slightly.

1. Right-click the choke value.
2. Change units to **millimeters**.
3. Measure and enter the required choke amount.
4. Click **OK**. Saving & Applying Changes

• Example: **1 mm**.

1. Click **OK**.
2. When prompted to save: Click **Yes** to apply changes to all images. Final Notes

White ink and choke adjustment workflow is now complete.

• Image-level adjustments affect only selected images.
• Profile-level adjustments apply globally.
• Choke settings help clean up white edges and improve print accuracy.