NeoStampaCustomer login

How to Create New Media in Neostampa

Every step links to its own moment in the video, so you never hunt for the right part again.

  • 5 steps
  • 11 instructions
  • 1 video
  • Updated 2026-04-20

NeoStampa — Changing Media Width

  1. 0:03Overview
  2. 0:101. Open a New Job
  3. 0:182. Adjust Media Width
  4. 0:383. Create a New Media Profile
  5. 0:504. Manage Predefined Sizes

Example Printer: Prestige R2 Pro

Written steps 5

Overview

Watch this part0:03

This guide explains how to change and save media width settings in NeoStampa using the Prestige R2 Pro as an example. Changing Media Width

1. Open a New Job

Watch this part0:10
  1. Click the **New Job** icon.
  2. Open the correct **print scheme** for your printer.

2. Adjust Media Width

Watch this part0:18
  1. Locate the **Media Width** setting.
  2. Default media width is **13 in**.
  3. Right-click on the media width to change the unit of length: Inches
  4. Change the media width to **12 in**.
  5. Observe the media preview shrink.
  6. Change the value back to **13 in** to see the media preview expand. Saving a Media Profile
  • Millimeters
  • Centimeters

3. Create a New Media Profile

Watch this part0:38
  1. Click **New**.
  2. Adjust the following fields: **Format Name**
  3. Select **12 in** as the page width.
  • **Page Width**

4. Manage Predefined Sizes

Watch this part0:50

Media width setup and profile creation are now complete.

  • The new **12 in** media profile will appear under **Predefined Sizes**.
  • From here, you can:
  • Remove the profile
  • Edit the profile
  • Add margins if needed

Stuck on a step?

Your authorized dealer installs, trains and services your machine, and our factory support team is behind them. Reach either from the support page.

Get support